Configurations

TiALSport turbine housings are available in several variations, with multiple A/R values.

All housings are designed, engineered, tooled, molded, cast and machined at our on-site foundry in Owosso, MI, USA. Housings are cast in a proprietary high- strength SS Superalloy for light weight, high strength and corrosion resistance even at elevated temperatures. Leak-proof v-flanges are offered in addition to industry-standard bolted flanges. Corresponding fabrication flanges are offered in 304SS. Seven externally-wastegated (EWG) housing families are offered, with a minimum of 3 A/R values per family. One internally-wastegated (IWG) family is offered, with 2 A/R values, and water-cooled (H2O IWG) versions are offered. Turbine wheel inducers from 50 to 120mm are accommodated within our housing line.

 

Connections

TiALSport established the standards for v-flanged turbine housings in the early 2000’s. We’ve recently begun producing bolted-flange options.

The V25V family services turbine inducers from 50-60mm
The V3V family services turbine inducers from 60- 65mm
The V35V family services turbine inducers from 62-80mm
The V4V family services turbine inducers from 80- 90mm
The V45V family services turbine inducers from 90-100mm
The V5V family services turbine inducers from 100-120mm
The F3V family services turbine inducers from 60- 80mm
The IWG family services turbine inducers from 50- 73mm
Options for G Series, GT Series and GTX Series are available.
Options for EFR and SXE Series are available
Options for Xona Rotor products are available

 

Accessories

Attachment hardware is available for all housing models, featuring 304SS v-flanges, U.S.-made v-clamps.

V25V through V35V housing have the same fitment and flange sizes, inlet and outlet.

IWG housings have the same inlet flange and centerline as V25V through V35V, but use a larger outlet flange dimension and greater axial placement.

F3V housings are direct replacements for popular “GT” series housing using a “T3” inlet flange.

V4V and V45V housing use the same fitment and inlet flange sizes, but the outlet flange of the V45V has a larger pilot feature.

Clamp/bolt kits for the V25 through V35V and IWG housings are included with each housing, but are available separately as well.

CHRA clamps for all other models are not included.

 

Dimensions- V25V and V3V

Housing dimensions vary with both frame size and A/R values. The following pages will provide specific dimensional values for confirmation of fitment.

V25V housings are offered in 0.52, 0.63 and 0.86A/R volutes.

These are designed for turbine inducers from 50-60mm.

V25V housings are currently only offered in standard-rotation configuration.

V3V housings are offered in 0.63, 0.86 and 1.06A/R volutes.

These are designed for turbine inducers from 60-65mm.

V3V housings are currently only offered in standard-rotation configuration.

 

Dimensions- V35V

Housing dimensions vary with both frame size and A/R values. The following pages will provide specific dimensional values for confirmation of fitment.

V35V housings are offered in 0.63, 0.82 and 1.03A/R volutes.

These are designed for turbine inducers from 62-80mm.

V35V housings are offered in both standard- and reverse-rotation configurations.

 

Dimensions- IWG

Housing dimensions vary with both frame size and A/R values. The following pages will provide specific dimensional values for confirmation of fitment.

IWG housings are offered in 0.62 and 0.80A/R volutes.

These are designed for turbine inducers from 50-73mm.

IWG housings are currently offered in standard-rotation configuration only.

These housings have the same inlet v- flange size and placement as all V25V through V35V housings, but use a larger outlet flange with a greater axial distance and location.

IWG housings use the TiALSport patented WG flow path shroud design.

IWG housings use a 42mm valve and 38mm port.

The lever position and length are optimized by using the TiALSport MVI 2.5 actuator and patented actuator bracket design.

A water-cooled version (IWG/H2O) is available for marine applications.

 

Dimensions- F3V

Housing dimensions vary with both frame size and A/R values. The following pages will provide specific dimensional values for confirmation of fitment.

F3V housings are offered in 0.53, 0.82, 1.06 and 1.21A/R, to provide the widest flow range possible.

These are designed for turbine inducers from 60-80mm

F3V housings are currently offered in standard-rotation configuration only.

F3V housings are fitment-compatible with popular “GT-style” housings using the T3 inlet flange design.

F3V housings use a unique v-flange, but the same v-clamp as V25V through V35V

 

Dimensions- V4V

Housing dimensions vary with both frame size and A/R values. The following pages will provide specific dimensional values for confirmation of fitment.

V4V housings are offered in 1.02, 1.16, 1.30 and 1.45A/R volutes.

These are designed for turbine inducers from 80-90mm.

V4V housings are currently offered in standard-rotation configuration only.

V4V housings are direct-fitment compatible with HKS “T51R” designs.

V4V housings are not direct-fitment compatible with O.E. GT/GTX designs.

V4V housings are direct-fitment compatible with the V45V housings, but use an outlet flange with a smaller pilot dimension.

A water-cooled version is available for marine applications.

 

Dimensions- V45V

Housing dimensions vary with both frame size and A/R values. The following pages will provide specific dimensional values for confirmation of fitment.

V45V housings are offered in 1.17, 1.31 and 1.45A/R volutes.

These are designed for turbine inducers from 90-100mm.

V45V housings are currently offered in standard-rotation configuration only.

V4V housings are direct-fitment compatible with HKS “T51R” designs.

V4V housings are not direct-fitment compatible with O.E. GT/GTX designs.

V45V housings are direct-fitment compatible with the V4V housings, but use an outlet flange with a larger pilot dimension.

 

Dimensions- V5V